一种求解层合圆柱壳的杂交应力单元

根据修正的余能原理，推导出一种求解复合材料层合圆柱壳的杂交应力单元。取用六面体等参单元，此单元反映了各层材料性质不同及应力分布沿整个厚度不连续现象，同时计入横向剪切变形和法向挤压变形，适用于厚层壳体。文章通过实例说明此单元能准确求出各层内的应力值，实用价值高。     

Stress relaxation,creep, and internal stresses in high density polyethylene filled with calcium carbonate

The effect of filling high density polyethylene (HDPE) with calcium carbonate (up to 50% by weight) on the stress relaxation and the creep in uniaxial extension at room temperature was investigated. The addition of CaCO₃ was found to have a strong influence on the flow behaviour of HDPE. In particular, it was observed that the internal stress level, calculated from relaxation data, increased markedly with the filler content. The reduction in creep rate of the filled samples suggested that the CaCO₃-particles induce a change in the structure of the HDPE-interphase close to the filler surface. This was supported by dynamic mechanical measurements performed at low temperatures on swollen HDPE-CaCO₃ samples.     

RENEWAL OF BASIC LAWS AND PRINCIPLES FOR POLAR CONTINUUM THEORIES (Ⅲ) —NOETHER’S THEOREM

The existing various couple stress theories have been carefully restudied.The purpose is to propose a coupled Noether’s theorem and to reestablish rather complete conservation laws and balance equations for couple stress elastodynamics. The new concrete forms of various conservation laws of couple stress elasticity are derived. The precise nature of these conservation laws which result from the given invariance requirements are established. Various special cases are reduced and the results of micropolar continua may be naturally transited from the results presented in this paper.     

A review of MEMS-based microscale and nanoscale tensile and bending testing

Thin films at the micrometer and submicrometer scales exhibit mechanical properties that are different than those of bulk polycrystals. Industrial application of these materials requires accurate mechanical characterization. Also, a fundamental understanding of the deformation processes at smaller length scales is required to exploit the size and interface effects to develop new and technologically attractive materials. Specimen fabrication, small-scale force and displacement generation, and high resolution in the measurements are generic challenges in microscale and nanoscale mechanical testing. In this paper, we review small-scale materials testing techniques with special focus on the application of microelectromechanical systems (MEMS). Small size and high force and displacement resolution make MEMS suitable for small-scale mechanical testing. We discuss the development of tensile and bending testing techniques using MEMS, along with the experimental results on nanoscale aluminum specimens.     

Prediction of flow stress at hot working condition

A mathematical model has been developed to determine flow stress at hot deformation condition. The proposed model is capable of including work softening due to dynamic phase transformations as well as the effect of temperature and strain rate variation on flow stress utilizing the additivity rule for strain. To verify the model, hot compression tests for two grades of steels has been carried out. The comparison between the experimental and theoretical results confirms the validity of the model.     

考虑疲劳裂纹扩展三维效应的James—Anderson修正方法

James-Anderson方法是一种借助材料疲劳裂纹扩展速率性能来确定三维裂纹应力强度因子的重要实验方法。本文对James-Anderson方法中的疲劳裂纹扩展三维效应进行了分析，并对其进行修正。修正后的James-Anderson方法考虑了疲劳裂纹扩展中由于应力状态而引起的三维效应。研究结果表明：和James-Anderson方法相比，修正后的James-Anderson方法得到的应力强度因子和三维数值方法所得的应力强度因子更吻合。     

螺旋焊线管局部噘嘴应力集中分析

螺旋焊缝局部噘嘴问题是复杂的三维问题，至今没有现成的安全评定公式可以利用，也难以获得纯粹的理论解。应“西气东输”工程之需，本文利用现有直焊缝理论基础，建立了该问题的力学模型，获得了应力集中因子的显式解，给制订螺旋焊线管几保缺陷的安全评定标准提供了理论基础。利用商用有限元工具ABAQUS对螺旋焊线局部噘嘴进行的系统分析显示，本文提供的理论解具有很强的预测能力。     

HKD-1型航空润滑油特征剪切应力及有效粘压系数确定的研究

在球盘式拖动力试验机上,对HKD-1型航空润滑油进行拖动力测量,给出了根据拖动力试验曲线的非线性上升段确定润滑油有效粘压系数和特征应力的方法,对HKD-1型航空润滑油在试验条件下的粘压系数和特征应力进行分析,并建立了其计算公式.结果表明:特征应力和有效粘压系数的求解方法简单合理,其计算公式的拟合精度较高,可为轴承动态特性设计提供计算依据;随着接触压力、入口油温和滚动速度增加,HKD-1型航空润滑油的特征应力增大,其粘压系数减小;滚动速度对特征应力和粘压系数的影响小于接触压力和入口油温.     

各向异性两相材料尖劈奇性场的非协调元分析

提出了一个基于位移的、分析柱状各向异性两相材料尖劈端部邻域的奇性位移场和应力场问题的非协调元特征分析法. 该方法从柱状扇区的散度定理出发，将柱状扇区控制方程的弱式化为一个与虚功原理相同形式的方程，采用一种新的非协调元技术把所导出的``虚功原理'转化为标准一阶特征方程的求解问题. 非协调元法中，尖劈端部邻域的位移场假定没有采用奇异变换技术，有限元的单元形式是一维的. 将柱状各向异性两相材料尖劈视为``广义平面应变'问题，位移场与坐标z无关，只关注界面端的幂奇异性而不考虑对数奇异性. 运用该方法给出了柱状各向异性两相材料尖劈端部奇性应力指数、奇性位移角分布和应力角分布的算例. 所有的计算结果表明，该方法使用的单元少而且精度较高.     

孔底空腔爆炸应力场分布的动光弹试验研究

在保护层开挖中,孔底空腔装药爆破的方法被证明对保护建基面是行之有效的。为了研究炮孔孔底空腔装药结构的爆炸作用机理,运用动光弹试验模拟介质受到爆炸载荷作用下的动态响应,分析了不同装药结构的孔底应力场分布情况及其作用规律;文中介绍了动光弹模型试验设计参数,通过对试验中条纹级数与比例距离曲线的对比分析,得出了合理的孔底空腔能有效地降低爆炸峰值压力和有利于保护建基面的结论。